Procedure For Resetting The Camera - Motorola FOCUSSATURN User Manual

6. Procedure for Resetting the Camera

Note: If your Camera is moved from one router (e.g. home) to another (e.g.
office) or you have Camera setup issues, then the Camera must be reset.
Please reset the Camera with the following procedures:
1. Switch off the camera by unplugging the power supply from the electrical
socket.
2. Press and hold the PAIR button, then plug the powers supply back into the
electrical socket.
3. Release the PAIR button when you hear a confirmation beep and wait for
the Camera Unit to complete an internal reset procedure. The Red
LED will begin to flash when the Camera Unit is reset successfully.
4. You can add your Camera again by following the steps in section 3.2.4 for
Android devices or in section 3.3.4 for iOS devices.
22 Procedure for Resetting the Camera