•
To pair the camera - Press and hold the PAIR button on the back of the
Camera for 8 seconds. You will then hear a beep tone, followed by a voice
prompt indicating that the Camera is ready for pairing. The LED will flash
Red / Blue.
Go to Settings > Wi-Fi menu on your iPhone ® /iPad ® . (Picture i5)
•
•
Select your Camera from the list of networks. (Picture i6)
•
Return to the Hubble app to resume setup and press Next (Picture i7)
•
Your device will detect available networks (Picture i8)
Getting started - Connecting Devices
i6
i7
Pair the device
i8
17