Storing Your Machine; Troubleshooting; Warranty - Bissell CROSSWAVE CORDLESS MAX 2554 Series Quick Start Manual

Storing Your Machine

Download the BISSELL Connect App for more useful tips on storing and maintaining
CrossWave Cordless Max.
Store CrossWave® Cordless Max in a protected, dry area. Since this product uses water, it must not
be stored where there is danger of freezing. Freezing will damage internal components and may void
the warranty.

Troubleshooting

Below are some of the issues you may run into. If you don't see the issue you're experiencing
below, visit support.BISSELL.com.
Problem Possible Cause
Battery icon Brush Roll obstruction.
on Digital
Display shows
3 red lights.
Dirty Water Tank is full.
Dirty Water
Tank icon
Digital Display
Dirty Water Tank is not seated
is illuminated
properly.
amber.
Brush Roll is dirty.
Machine is
leaking.
Over-saturation of water on
ground.
Brush Roll Window is not
latched in place.
Debris channel in foot is
Loss of suction
clogged.
power.
Filter clogged by debris.
Note: Any other servicing should be performed by an authorized service representative.

Warranty

2-Year limited warranty, may vary by state. Visit support.BISSELL.com or call 1-844-383-2630
for complete warranty information.
NOTICE
To reduce the risk of a leaking condition, do not store machine where freezing may occur. Damage to internal
components may result.
Remedies
Remove hair and debris from Brush Roll
Window, Brush Roll and gear at end of the foot.
Remove and empty tank. Thoroughly clean tank
and sensors. Place tank back into the machine.
Reseat tank.
Place the machine on the 3-in-1 Docking Station
and run the Clean Out Cycle.
Turn machine ON, recline, and make two passes
without dispensing solution.
Reinstall Brush Roll Window.
Clean the channel with a paper towel.
Remove filter from the top of the Dirty Water
Tank, remove debris clogging the filter screen
and clean the filter.
BISSELL.com 11