GREE ELECTRIC GWHDND3EO Service Manual page 61

Service Manual
8. Remov e
Cut off Valve and
Remove the 2 bolts fixing the valve subassemblies.
Unsolder the welding joint connecting the gas valve
and the return air pipe. Remove the gas valve.
(Note: When unsoldering the soldering joint, wrap the
gas valve with wet cloth completely to avoid damage
to the valve caused by high temperature.)
Unsolder the welding joint connecting the liquid valve
and the connecting pipe.Remove the liquid valve.
Remove screws fixing valve support and then remove
the valve support; remove the screw fixing the
condenser and then pull the condenser upwards to
remove it.
9. Remov e compressor
Remove the 3 foot nuts fixing the compressor
and then remove the compressor.
10.Remove support
a Remove the screws connecting the support
and condenser assy,and thenremove the support.
Installation and Maintenance
Valve Support
support
Valve Support
Cut off Valve
59