GREE ELECTRIC GWHDND3EO Service Manual page 54

Steps
11.Remove electric box sub-assy
Remove the tapping screws fixing isolation sheet,
loosen the wire binds, pull out the terminal, lift to
remove the electric box sub-assy.
12.Remove PFC electrical inductance
Remove the screws fixing PFC electrical inductance
and isolation sheet, to remove the PFC electrical
inductance.
13.Remove four-way valve sub-assy
Welding cut the welding point jointing the four-way
valve with blowtorch to remove the four-way valve
sub-assy. (Note: please make sure theres no
refrigerant in the unit before remove any tube or
compressor)
52
Procedure
Service Manual
electric box sub-assy
PFC electrical inductance
four-way valve
sub-assy
Installation and Maintenance