GREE ELECTRIC GWHDND3EO Service Manual page 55

Service Manual
Steps
14.Remove suction pipe sub-assy
Welding cut the welding point jointing the suction
pipe sub-assy, compressor and liquid receiver, to
remove the suction pipe sub-assy.
15.Remove liquid receiver
Remove the screws fixing isolation sheet and liquid
receiver and lift to remove the liquid receiver.
16.Remove the isolation sheet assy
Remove the screws fixing isolation sheet and
condenser side plate, to remove the isolation sheet
assy.
Installation and Maintenance
Procedure
suction pipe sub-assy
liquid receiver
isolation sheet assy
53