Table of Contents
Advertisement
Enter 5 at the Network Cfg prompt to specify the BSC mode, i.e. how the
6.
BSAP is to obtain the IP address of its home BSC.
You can set the BSC mode to either Discover or Static BSC.
Enter 1 to set the BSC mode to Static BSC.
Enter 6 at the Network Cfg prompt to specify the IP address of the BSAP's
7.
home BSC.
Enter 8 at the Network Cfg prompt to review the BSAP network configuration
8.
settings you have made.
The network summary includes the MAC addresses of the BSAP's Ethernet
and wireless interfaces.
Enter p at the CLI prompt to return to the main menu.
9.
Enter 2 at the main menu to apply your configuration changes, reboot the
BSAP, and put the new configuration settings into effect.
When the BSAP completes its reboot, it will connect to and download its
configuration from the home BSC you have configured via the CLI.
12
Advertisement
Table of Contents
