Table of Contents
Advertisement
Navigating the BSAP CLI
The BSAP CLI main menu provides access to these options:
• Network Configuration - Configure the BSAP's network settings including
its IP address and the IP address of the BSC to which it will connect.
• Save/Apply Configuration - After you have configured the BSAP's
network settings, you must apply them before they become active.
• Restore Defaults - Restore the BSAP to its default settings.
• Show Version Information - Display BSAP version information.
• Reboot AP - After applying the BSAP's configuration settings, you must
reboot the BSAP to effect the new configuration.
When operating in a submenu, press h to return directly to the main menu (or
home menu). Press p to return to the previous menu.
BSAP Default Configuration
The BSAP is shipped with the following default configuration.
IP_ADDR_MODE:
IP_ADDR
NETMASK
GW_ADDR
DNS_ADDR
WG_ADDR_MODE
WG_ADDR
10
Figure 5: BSAP CLI Main Menu
DHCP (0)
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
Discover BSC (0)
0.0.0.0
Advertisement
Table of Contents
