Advertisement
5.11
ASSEMBLING THE CERAMICS AND FUEL BED - PEBBLE MODELS
5.11.1
Place the ribbed ceramic fuelbed base on top of the fuelbed support
and pull fully forwards to the burner. Make sure that the fuelbed
base is located centrally in the fire box. Ensure that the fuelbed
base fit fully down onto the fuel bed support and is not
lodged on the burner. (See figure 11 below).
Fig. 11
5.11.2
Position front ceramic rail on burner front ceramic support and ensure
that the locating channel in the front ceramic rail is correctly located
onto the lip on the burner front ceramic support. (See figure 11 below).
Fig. 11
59
Advertisement
