Philips HC5450/16 User Manual page 13

1 Disconnect the appliance from the mains and let the appliance
operate until the motor stops.
2 Press the release button (1) and remove the cutting unit (2).
3 Insert the screwdriver between the motor unit and the back panel of
the appliance. Press down the screwdriver as far as it will go
4 Tilt the handle of the screwdriver downwards (1) and separate the
back panel from the appliance (2).
5 Remove the side panels. Pull the bottom part of the printed circuit
board with the rechargeable batteries attached from the appliance.
6 Cut the wires to separate the rechargeable batteries from the
appliance.
Do not connect the appliance to the mains again after you have opened
it.
guarantee and support
If you need information or support, please visit
www.philips.com/support or read the separate worldwide
guarantee leaflet.
EnglisH
13