Bosch Nyon Owner's Manual page 26

English – 24
<Trip Analysis>
p
q
s
p <Riding Mode Usage>
Indicator for use of different riding modes
q <Max. Speed>
Indicator for maximum speed
r <Ascent>
Indicator for gradient
s <Avg. Power>
Indicator for the ratio of your own power com-
pared to drive power
<Savings>
Here you can compare savings against a car journey.
Tapping on the tile allows the view to be switched be-
tween saved monetary value and saved CO
ues are accumulated for a single journey. The values
for the week and the preceding week are accumu-
lated and displayed. The values are set to 0 when the
journey data is reset. The settings can be individually
adapted via the Settings menu.
Creating custom screens
To integrate preset screens or create new screens, go
to the Status Screen and select the <Screens> s9
1 270 U20 BN2 | (14.03.2023)
button. Four icons are shown to you in the footer that
allow you to make an adjustment.
You also have the option to start the function
via <Settings> → <Screens>.
The following options are available to you:
– Move screens
– Create new screens
– Delete screens
– Add predefined screens
When creating your own screens, there is the possi-
r
bility of inserting the <Speed>, <Cadence> and <My
Power> tiles with built-in destination indicator.
If the pointer of the destination indicator is on the
left-hand side, the background goes orange. Your
performance is below the average value.
If the pointer of the destination indicator is on the
right-hand side or in the center, the background goes
green. That means that your performance is above
the average value or is in line with it.
<Fitness> (predefined screen)
f1
f2
. All val-
2
f3
f1 <My Power>
Indicator for own output
f2 <Cadence>
Indicator for cadence
f4
Bosch eBike Systems