Subscribe to Our Youtube Channel
Related Manuals for ETEKCITY FIT 8S
Summary of Contents for ETEKCITY FIT 8S
- Page 1 Smart Fitness Scale Model: FIT 8S User Manual Questions or Concerns? Mon–Fri, 9:00 am–5:00 pm PST/PDT support@etekcity.com • (855) 686-3835...
- Page 2 Thank you for purchasing the Smart Fitness Scale by Etekcity. If you have any questions or concerns, please reach out to our helpful Customer Support Team at support@etekcity.com. We hope you enjoy your new smart fitness scale!
- Page 3 Table of Contents Package Contents Specifications Safety Information Function Diagram Digital Display VeSync App Setup Before First Use Using the Smart Scale Using the App Maintenance Troubleshooting Warranty Information Customer Support...
- Page 4 Package Contents 1 x Smart Fitness Scale 3 x 1.5V AAA Batteries (Pre-Installed) 1 x Quick Start Guide Specifications Weight Capacity 400 lb / 28 st / 180 kg Increments 0.1 lb / 0.05 kg Weight Units lb / st / kg Platform Tempered glass 10.2 x 10.2 x 0.8 in / Dimensions...
- Page 5 READ AND SAVE THESE INSTRUCTIONS Safety Information Please read and follow all instructions and safety guidelines in this manual. Medical • This scale should not be used to diagnose or treat any medical condition. • Scale data should not be used as a substitute for medical advice from a healthcare professional.
- Page 6 • The glass platform is slippery when wet. Always make sure the platform and your feet are dry before stepping on for measurement. • Place the scale on a hard, flat surface to avoid tipping. • To weigh safely and accurately, stand with your feet shoulder- width apart while on the scale.
- Page 7 Function Diagram Weighing Platform Unit Switching Button Display Battery Compartment Anti-Skid Padding...
- Page 8 Digital Display Weight Measurement Wireless Connection Icon Weight Units...
- Page 9 VeSync App Setup Note: Due to app updates and improvements, the contents of this manual may change without notice. The VeSync app user interface may appear slightly different. To download the VeSync app, scan the QR code or search “VeSync” in the Apple App Store or Google Play™...
- Page 10 Before First Use Open the battery compartment on the underside of the scale. Remove the included AAA batteries. Remove the plastic insulator strip from the battery compartment. Replace the batteries. Follow the guidelines in the battery compartment to match the –...
- Page 11 Weighing Without the VeSync App Place the scale on a hard, flat surface. [Figure 1.1] Step on the scale, then step off. Wait for the screen to display “0.0” before using. Place dry, bare feet on the scale’s conductive areas. Stand on the scale until the display flashes several times, showing your final measurement.
- Page 12 Switching Units To change the unit of measurement (kg, lb, or st), step on the scale to turn it on. Then, turn the scale over and press the unit conversion button on the underside. To keep the settings consistent, make sure the scale is connected to the VeSync app.
- Page 13 Using the App Creating a User If you are a new user, you will need to enter your physical information before weighing yourself for the first time so the scale can calculate your body metrics. Note: • Entering inaccurate information will make the scale’s measurements less accurate.
- Page 14 Maintenance Clearing the Scale If the scale has been moved or flipped upside down, it must be cleared to ensure accurate results. Place the scale on a hard, flat surface. Step on the scale until digits appear on the display, then step off.
- Page 15 Cleaning the Scale • Use a slightly damp cloth to clean the surface of the scale, followed by a soft, dry cloth to wipe away any remaining moisture. • Do not use chemical or abrasive cleaning agents to clean the scale.
- Page 16 Display Messages Wireless Connection Change Battery Overload Clearing...
- Page 17 Troubleshooting The scale doesn’t turn on. • Check if the batteries are properly installed. If using the scale for the first time, remove the plastic insulator strip from the battery compartment. Information flashes on the screen and then disappears. • The batteries are low and may need to be replaced. The smart scale can’t be added to the VeSync app.
- Page 18 2. Try the following steps to pair your scale and your phone. • Enable Bluetooth on your Phone. ® • Light up the scale and keep it on. • Open the Vesync App, and click “Add Device” or “+” on the top right corner of the home page.
- Page 19 My scale only measures my weight, not my body fat or other metrics. • Set up your smart scale in the VeSync app. Your weight will show on the scale display, and more results will show on the app. • Make sure Bluetooth is turned on. •...
- Page 20 Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
- Page 21 During the Limited Warranty Period and subject to this limited Warranty Policy, Etekcity will, in its sole and exclusive discretion, either (i) refund the purchase price if the purchase was made directly from the online Etekcity store, (ii) repair any defects in material or workmanship, (iii) replace the product with another product of equal or greater value, or (iv) provide store credit in the amount of the purchase price.
- Page 22 You can protect yourself and your products by making sure you only purchase from Etekcity or its authorized dealers.
- Page 23 NONCONFORMITY OF THE PRODUCT COVERED BY THIS LIMITED PRODUCT WARRANTY STATEMENT. THIS LIMITED WARRANTY IS EXCLUSIVE, AND IN LIEU OF ALL OTHER WARRANTIES. NO EMPLOYEE OF ETEKCITY CORPORATION OR ANY OTHER PARTY IS AUTHORIZED TO MAKE ANY WARRANTY IN ADDITION TO THE LIMITED WARRANTY IN THIS LIMITED PRODUCT WARRANTY STATEMENT.
- Page 24 PURCHASE PRICE PAID BY THE PURCHASER FOR SUCH PRODUCTS, OR (b) INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES EVEN IF ETEKCITY CORPORATION OR ONE OF ITS SUPPLIERS HAS BEEN ADVISED OF THE POSSIBILITY OR LIKELIHOOD OF SUCH DAMAGES. AND REGARDLESS OF WHETHER CAUSED BY TORT (INCLUDING NEGLIGENCE), BREACH OF CONTRACT, OR OTHERWISE.
- Page 25 UNDERSTAND YOUR RIGHTS FULLY. CHANGES TO THIS POLICY We may change the availability of this limited warranty at our discretion, but any changes will not be retroactive. This warranty is made by: Etekcity Corporation 1202 N. Miller St., Suite A Anaheim, CA 92806...
- Page 26 Customer Support If you have any questions or concerns about your new product, please contact our helpful Customer Support Team. Etekcity Corporation 1202 N. Miller St., Suite A Anaheim, CA 92806 Email: support@etekcity.com Toll-Free: (855) 686-3835 Support Hours Mon–Fri, 9:00 am–5:00 pm PST/PDT *Please have your order invoice and order ID ready before contacting Customer Support.
- Page 27 United States and certain other countries. The Bluetooth word mark and logos are registered trademarks owned ® by Bluetooth SIG, Inc. and any use of such marks by Etekcity Corporation is under license. Other trademarks and trade names are those of their respective owners.
- Page 28 01.00_D_23E29_us...
Need help?
Do you have a question about the FIT 8S and is the answer not in the manual?
Questions and answers