Introduction; Requirements; Software Requirements; Operating System Requirements - Rimage Amigo II User Manual
Rimage amigo ii: user guide
Hide thumbs
Also See for Amigo II:
- Reference manual (6 pages) ,
- Hardware manual (5 pages) ,
- Setup and installation manual (4 pages)
Table of Contents
Advertisement
Introduction
Introduction
This manual provides the information needed to operate the Amigo II and identify the parts. To set up and
install your Amigo II, refer to the Amigo II Setup and Installation Guide.
The Amigo II is available with either the Everest Printer or the PrismPlus Printer.
Amigo II with Everest Printer
Amigo II with PrismPlus Printer
Requirements
Software requirements
The Amigo II will operate only with the Rimage Producer Software.
Operating System requirements
The Amigo II runs on Windows 2000 SP4, Windows XP SP1 or SP2, and Windows 2003.
Media requirements
Refer to your Everest Printer User Guide or PrismPlus! Printer User Guide for the correct media
requirements.
Ribbon requirements
Refer to your Everest Printer User Guide or PrismPlus! Printer User Guide for the correct printer ribbons.
Label design requirements
Refer to your Everest Printer User Guide or PrismPlus! Printer User Guide for the correct label design
requirements.
Networking ability
To submit orders from a networked PC, refer to the Rimage Advanced Setup Guide.
110654_G
1
Advertisement
Table of Contents
