Download Print this page

Beko WTV 8734 XCM User Manual page 48

Advertisement

12.2.1 Opening the loading door in case of power failure:
• In case of power failure, you can use the loading door
emergency handle under the pump filter cap to open the
NOTE
loading door manually.
• To avoid any water overflow before opening the loading
door, make sure there is no water left inside the machine.
WARNING!
12.3 Drum Illumination
EN / 48
a) Open the pump filter cap.
b) Release the loading door emergency handle
c) Pull down the loading door emergency handle
d) If the loading door does not open, try again by
Drum illumination lamp of your machine will light up during
programme selection. The light will turn off when you start the
programme. If no programme is started or no key is pressed within 10
minutes during programme selection process, the drum illumination
lamp will turn off.
Drum illumination lamp of your machine will light up 1-2 minutes
after the programme is completed. It will go off when you press the
On/Off button. The drum illumination lamp will turn off if you do not
press any button within 10 minutes after the programme has ended.
located at the rear side of the filter cap.
once and open the loading door. After opening
the loading door, re-insert the loading door
emergency handle.
pulling down the handle.
Washing Machine / User's Manual

Advertisement

loading