Related Manuals for Beko WTV 8744 CS XWST
Summary of Contents for Beko WTV 8744 CS XWST
- Page 1 Washing Machine User Manual WTV 8744 CS XWST Document Number= 2820526565_EN/ 28-02-18. ( 13: 1 5)
- Page 2 Dear Customer, Please read this user manual first! Thank you for preferring a Beko product. We hope that you get the best results from our product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
-
Page 3: Table Of Contents
CONTENTS 1. General safety instructions 1.1 Children's safety ...........................5 1.2 Product safety ..........................6 1.3 Electrical safety..........................6 1.4 Hot surface safety ........................7 1.5 Other ..............................7 2. Instructions for environmental protection 2.1 Compliance with WEEE Directive ..................8 2.2 Disposing of the waste product ................... 8 2.3 Package information ......................... - Page 4 8.4.8 Using starch ............................26 8.4.9 Using limescale remover ........................26 8.4.10 Using bleaches ........................... 26 9. Programmes and auxiliary functions 9.1 Programme selection ......................27 9.2 Programmes ..........................28 9.3 Programme table ........................33 9.4 Auxiliary function selection ....................35 9.4.1 Auxiliary functions ..........................36 9.4.2 "Functions/Programmes Selected by Pressing the Function Buttons for 3 Seconds"...
-
Page 5: General Safety Instructions
1. General safety instructions 1.1 Children's safety • Children under the age of should be kept away unless continuously supervised. • This product can be used by children at and WARNING! above years old and by persons whose physical, sensory or mental capabilities were not fully developed or who lack experience and knowledge provided that they are supervised or trained on the safe usage of the product and... -
Page 6: Product Safety
1.2 Product safety • Unplug the product when not in use. • Always have the installation and repairing procedures carried out by the Authorised WARNING! Service Agent. • Do not force open the locked loading door. The door will open immediately after the washing cycle has ended. -
Page 7: Hot Surface Safety
1.4 Hot surface safety • The glass of the loading door gets too hot while washing at high temperatures. Therefore, especially do not allow children touch the glass while washing. WARNING! 1.5 Other • Do not use combustible, flammable and other similar chemicals for product cleaning or other purposes. -
Page 8: Instructions For Environmental Protection
2. Instructions for environmental protection 2.1 Compliance with WEEE Directive This product does not contain harmful and forbidden materials described in the "Regulation on the Control of the Waste Electrical and Electronic Equipment" issued by T.R. Ministry of Environment and Urbanization. It complies with the WEEE Directive. 2.2 Disposing of the waste product This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling. -
Page 9: What You Can Do For Energy Saving
2.4 What you can do for energy saving • Comply with the information in the programme and consumption table section. - If the washing machine is overloaded, its washing performance will drop. CAUTION! - Moreover, noise and vibration problems may occur. Following information will help you use the product in an ecological and energy-efficient manner. -
Page 10: Your Product
4. Your product 4.1 Overview 1- Power cable 2- Top panel 3- Control panel 4- Water discharge hose 5- Loading door 6- Filter cap 7- Adjustable feet 8- Detergent drawer EN / 10 Washing Machine / User’s Manual... -
Page 11: Package Contents
4.2 Package contents Power cable Water discharge hose Transportation safety bolts Mains water inlet hose Liquid detergent container User manual Plastic plug group • Figures in this manual are schematic and may not match the product exactly. NOTE EN / 11 Washing Machine / User’s Manual... -
Page 12: Control Panel
4.3 Control panel WTV 8744 CS XWST Děti a alergici Bavlna Deti a alergici Osvěžení Bavlna Eco Osvieženie Zrychlené praní Košile Teplota Syntetika Zap. / Vyp. Zrýchlené pranie Košele Odstranění skvrn Extra rychlé praní Odstránenie škvŕn Extra rýchle pranie Odložený start Otáčky... -
Page 13: Screenshot
4.4 Screenshot Temperature indicator 2 - Temperature symbol 3 - No water symbol 4 - Programme follow-up indicator 5 - Quick wash indicator 6 - Duration information Auxiliary functions light 1 8 - Auxiliary functions light 2 9 - Delayed start enabled symbol 10 - Door lock is engaged symbol 11 - Child lock enabled symbol 12 - Auxiliary functions light 3 13 - Spin speed selection indicator... -
Page 14: Technical Specifications
5.Technical specifications Complying Commission Delegated Regulation (EU) No 1061/2010 Supplier name or trademark Beko Model name WTV 8744 CS XWST Rated capacity (kg) Energy efficiency class / Scale from A+++ (Highest Efficiency) to D (Lowest Efficiency) A+++ Annual Energy Consumption (kWh) Energy consumption of the standard 60°C cotton programme at full load (kWh) -
Page 15: Installation
6. Installation 6.1 Appropriate installation location • Damaged products cause risks for your safety. - Prior to installation, visually check if the product has any defects on it. WARNING! - If so, do not have it installed. • Do not place the product on a floor without sufficient capacity to carry the load. - Otherwise, the product or the floor may be damaged. CAUTION! - Total weight of the washing machine and the dryer -with full load- when they are placed on top of each other is... -
Page 16: Removing Packaging Reinforcement
6.2 Removing packaging reinforcement • Seek someone's help for this procedure. - Risk of getting injured. CAUTION! To remove the packaging reinforcement; a) Tilt the product backwards. b) Remove the packaging reinforcement by pulling the ribbon. 6.3 Removing transportation safety bolts • Remove the transportation safety bolts before operating the product! - Otherwise, the product will be damaged. CAUTION! a) Loosen all transportation safety bolts with an appropriate wrench until they turn freely. -
Page 17: Connecting Water Supply
c) After removing bolts, close the holes with plugs provided in the user manual bag. • Keep the transportation safety bolts in a safe place for reuse when the product needs to be moved again in the NOTE future. • Before moving the product, install the transportation safety bolts in reverse order of the disassembly procedure. 6.4 Connecting water supply • The water supply pressure required to run the product is between 1 to 10 bars (0.1 – 1 MPa). (It is necessary to have 10 –... -
Page 18: Connecting The Water Draining Hose To The Drain
a) Connect the straight end of the mains inlet hose provided with the product to the cold water tap and the warped end to the water inlet on the back of the product as shown in the figure. b) Tighten all hose nuts by hand securely. Never use a tool when tightening the nuts. -
Page 19: Adjusting The Feet
d) To prevent the waste water to go back into the product again and to ensure easy drainage, do not immerse the end of the hose into the waste water or do not insert it into the drain for more than 15 cm. If it is too long, cut it short. -
Page 20: Electrical Connection
a) Loosen the lock nuts on the feet by hand. b) Adjust the feet until the product stands level and balanced. c) Tighten all lock nuts again by hand. 6.7 Electrical connection • Damaged power cables must be replaced by the Authorised Service Agents. DANGER! a) Connect the product to a grounded outlet protected by a 16 A fuse. • Our company shall not be liable for any damages that will arise when the product is used without grounding in NOTE accordance with the local regulations. -
Page 21: Initial Use
7. Initial use 7.1 Drum cleaning • Apply drum cleaning without any laundry in the product. NOTE a) Use the Drum Cleaning programme. b) Set the temperature to the level recommended on the special drum cleaning agent package which can be provided from Authorised Service Agents. c) Before starting the programme, put 1 pouch of special drum cleaning agent (if the special agent could not be supplied, put max. 1 teaspoon of (max. 100 g) of powder anti-limescale) into the main wash detergent compartment. -
Page 22: Preparing To Wash
8. Preparing to wash 8.1 Sorting the laundry a) Sort laundry according to type of fabric, colour, and degree of soiling and allowable water temperature. a) Follow instructions on the garment tags. a) Do not wash colours and whites together. New and dark coloured cottons may release a lot of dye. -
Page 23: Preparing Laundry For Washing
8.2 Preparing laundry for washing a) Remove the metal pieces such as support wire, belt buckle or metal buttons or wash the clothes by putting them in a laundry bag or pillow case. b) Take out all substances in the pockets such as coins, pens and paper clips, and turn pockets inside out before washing. -
Page 24: Using Detergent
8.4 Using detergent 8.4.1 Detergent drawer The detergent drawer is composed of three compartments: – (1) for prewash – (2) for main wash – (3) for softener – ( ) in addition, there is a siphon piece in the softener compartment. 8.4.2 Detergent, softener and other cleaning agents a) Add detergent and softener before starting the washing programme. -
Page 25: Choosing The Detergent
8.4.3 Choosing the detergent • Do not use soap powder. • Use only detergents manufactured specifically for washing machines. CAUTION! • Detergent type to be used depends on the fabric type and colour. NOTE a) Use different detergents for coloured and white laundry. b) Wash your delicate clothes only with special detergents (liquid detergent, wool shampoo, etc.) used solely for delicate clothes. c) When washing dark coloured clothes and quilts, it is recommended to use liquid detergent. -
Page 26: Using Tablet And Capsule Liquid Detergents
8.4.6 Using tablet and capsule liquid detergents a) If tablet is a capsule with liquid detergent, put it directly into the drum before washing. b) Put tablet detergents into the main wash compartment or directly into the drum before washing. 8.4.7 Using softeners a) Pour the softener into the softener compartment of the detergent drawer. -
Page 27: Programmes And Auxiliary Functions
9. Programmes and auxiliary functions 9.1 Programme selection • Programmes are limited with the highest spin speed appropriate for that particular type of fabric. NOTE • When selecting a programme, always consider the type of fabric, colour, degree of soiling and permissible water temperature. • Always select the relevant lowest required temperature. Higher temperature means higher electricity consumption. a) Select the desired programme with the Programme Selection knob. • If no programme is started or no key is pressed within 10 minute during programme selection process, the product NOTE... -
Page 28: Programmes
9.2 Programmes • You can see laundry type and washing suggestions on clothing tags. NOTE • Bavlna Eco (Cottons Eco) Use to wash your normally soiled, durable cotton and linen laundry. Although it washes longer than all other programmes, it provides high energy and water savings. Actual water temperature may be different from the stated wash temperature. When you load the machine with less laundry (e.g. ½ capacity or less), periods in programme stages may automatically get shorter. - Page 29 Woolens programme of this machine is approved by The Woolmark Company for washing machine-washable woolen products provided that the products are washed in accordance with the instructions on the product tag and the instructions published by the manufacturer of this machine. M1325 In the UK, Ireland, Hong Kong and India, the Woolmark trademark is a Certification trademark.
- Page 30 • Odstřed’ování (Spin+Drain) Use to drain the water in the product. • Máchání (Rinse) Use when you want to rinse or starch separately. • Košile (Shirts) This programme is used to wash the shirts made from cotton, synthetic and synthetic blended fabrics altogether. It reduces wrinkles. When "Quick Wash" setting button is pressed, the Pre-treatment algorithm is executed.
- Page 31 Use this programme to reduce the creases and ironing times of a small amount of unspotted cotton, synthetic or mixed laundry. • Extra rychlé praní (Daily Xpress / Xpress Super Short) Use this programme to wash your lightly soiled and unspotted cotton clothes in a short time. When the "Quick Wash" setting button is pressed, programme duration can drop to 14 minutes.
- Page 32 Blood Chocolate Pudding Grass When the "Quick Wash" button is pressed once Butter Curry Coffee Fruit juice Ketchup When the "Quick Wash" button is pressed twice Red wine Starch Coal • Select the stain programme. • Select the stain you want to clean by locating it in the groups above and using the "Quick Wash" setting button. For detailed information, see the Programme settings section. • Read the garment tag carefully and ensure that correct temperature and spin speed are selected.
-
Page 33: Programme Table
9.3 Programme table Auxiliary functions Selectable Programme temperature range °C 2,40 1400 • • • • Cold-90 1,70 1400 • • • • Cold-90 Bavlna 0,85 1400 • • • • Cold-90 0,55 1400 • • • • Cold-90 60** 0,915 1400 Cold-60... - Page 34 ** “Cotton Economic 40°C" and "Cotton Economic 60°C" are standard programmes. These programmes are known as "40°C cotton standard programme" and "60°C cotton standard programme" and indicated with the symbols on the panel. • Water and power consumption may vary from the above table subject to the changes in water pressure, water NOTE hardness and temperature, ambient temperature, type and amount of laundry, selection of auxiliary functions and spin speed, and changes in electric voltage. • You can see the washing duration on the display of your machine while selecting a programme.
-
Page 35: Auxiliary Function Selection
9.4 Auxiliary function selection • When you try to change an auxiliary function that is not allowed to be selected with the current programme, NOTE indicator light of the relevant auxiliary function will not flash, only an audio warning is given. Frames of available options will be lit. • If a second auxiliary function conflicting with the first one is selected before starting the product, the function selected first will be cancelled and the second auxiliary function selection will remain active. • An auxiliary function that is not compatible with the programme cannot be selected. -
Page 36: Auxiliary Functions
9.4.1 Auxiliary functions • Předpírka (Prewash) A Prewash is only worthwhile for heavily soiled laundry. Not using the Prewash will save energy, water, detergent and time. • Extra máchání (Extra Rinse) This function enables the product to make another rinsing in addition to the one already made after the main wash. Thus, the risk for sensitive skins (babies, allergic skins, etc.) to be effected by the minimal detergent remnants on the laundry can be reduced. - Page 37 • Anti-Creasing+ This function is selected when the 3rd auxiliary function is pressed and held for 3 seconds and the programme follow-up light for the relevant step turns on. When the function is selected, the drum rotates for up to 8 hours for preventing the laundry from creasing at the end of the programme. You can cancel the programme and take your laundry out at any time during the 8-hour duration.
-
Page 38: Programme Setting
10. Programme setting 10.1 Temperature selection a) Whenever a new programme is selected, the recommended temperature for the selected programme appears on the temperature indicator. b) To decrease the temperature, press the Temperature Adjustment button. Temperature will decrease gradually. c) It turns back to the beginning after "Cold" option and arrives at the highest temperature selectable according to the programme. -
Page 39: Quick Wash Setting (Zrychlené Praní)
• Rinse Hold If you are not going to unload your clothes immediately after the programme completes, you can use rinse hold function to keep your laundry in the final rinsing water in order to prevent them from getting wrinkled when there is no water in the machine. -
Page 40: Starting The Programme
10.4 Starting the programme a) Press Start / Pause button to start the programme. b) Programme follow-up light showing the startup of the programme will turn on. 2 45 10.5 Programme steps a) The symbols below appear on programme follow-up indicator after the programme starts. -
Page 41: End Of Programme
10.6 End of programme a) "End" symbol appears on the display when the programme is complete. 2 45 • If you do not press any button for 10 minutes, the product will turn off automatically. Display and all indicators are NOTE turned off. • Completed programme steps will be displayed if you press On / Off button. b) Remove your laundry. c) Switch off the product by pressing and holding the On/Off button for 3 seconds. -
Page 42: Programme Options
11. Programme options 11.1 Setting the end time • Do not use liquid detergents without a liquid cup when you activate End Time function. There is the risk of staining of NOTE the clothes. • When the End Time selection is completed, the time appears on the display is the end time chosen plus the duration of the selected programme. a) With the End Time function, the startup of the programme can be delayed up to 24 hours. After pressing End Time button, the programme's estimated ending time is displayed. -
Page 43: Cancelling The End Time Setting
Adding laundry during End Time countdown. a) Press the Start / Pause button. b) The loading door will open and the door symbol on the display will go off. c) Open the loading door and add laundry. d) Close the loading door. f) Press the Start / Pause button. -
Page 44: Cancelling The Programme
c) If the water level in the machine is suitable, the door lock will be deactivated and the door will open, allowing you to add garments. The door lock icon on the display goes off when the door lock is deactivated. -
Page 45: Additional Features
12. Additional features 12.1 Activating and deactivating the audio warning a) Press and hold 1st and 2nd auxiliary function buttons for 3 seconds to activate and deactivate the audio warning. b) Programme selection display on the panel will count down as “3, 2, 1”. c) If the audio warning is active it will be deactivated and vice versa. 12.2 Loading door lock a) Press Start / Pause button to lock the loading door for safety purposes after starting any process. -
Page 46: Opening The Loading Door In Case Of Power Failure
12.2.1 Opening the loading door in case of power failure: • In case of power failure, you can use the loading door emergency handle under the pump filter cap to open the NOTE loading door manually. • To avoid any water overflow before opening the loading door, make sure there is no water left inside the machine. WARNING! a) Open the pump filter cap. b) Release the loading door emergency handle located at the rear side of the filter cap. -
Page 47: Maintenance And Cleaning
13. Maintenance and cleaning 13.1 Cleaning the detergent drawer • Clean the detergent drawer at regular intervals (every 4-5 washing cycles) as shown below in order to prevent NOTE accumulation of powder detergent in time. • If more than normal amount of water and softener mixture starts to gather in the softener compartment, the siphon must be cleaned. a) Press the dotted point on the siphon in the softener compartment and pull and remove the detergent drawer towards yourself. -
Page 48: Cleaning The Water Intake Filters
13.4 Cleaning the water intake filters There is a filter at the end of each water intake valve at the rear of the product and also at the end of each water intake hose where they are connected to the tap. These filters prevent foreign substances and dirt in the water to enter the product. -
Page 49: Cleaning Dirty Filters
13.5.1 Cleaning dirty filters • Temperature of the water inside the product may rise up to 90 ºC. To avoid the risk of scalding, clean the filter after the water inside the product has cooled down. CAUTION! a) Unplug the product. b) Open the filter cap. Open the filter cap. c) Proceed as follows for draining water. - Place a large container in front of the filter to catch water from the filter. -
Page 50: Troubleshooting
14. Troubleshooting Problem Cause Solution Programs do not Start / Pause / Cancel button is • Press Start / Pause / Cancel button. not pressed. start after the It may be difficult to close • Reduce the amount of laundry and make loading door is sure that the loading door is closed the loading door in case of... - Page 51 Problem Cause Solution Loading door cannot Loading door lock is activated • Drain the water by running the Pump or Spin programme. because of the water level in be opened. the product. Product is heating up the water • Wait until the programme completes. or it is at the spinning cycle.
- Page 52 Problem Cause Solution Product does not There is unbalanced load in the • Automatic unbalanced load detection system is activated due to the unbalanced product. switch to spinning distribution of the laundry in the product. step. (*) The product will not spin if • Check the filter and the draining hose.
- Page 53 Problem Cause Solution Colour of the clothes Excessive laundry was loaded in. • Do not load the product in excess. faded. (**) Detergent in use is damp. • Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures. A higher temperature was • Select the proper programme and selected. temperature according to the type and soiling degree of the laundry.
- Page 54 Problem Cause Solution Detergent residue Detergent was put in wet • Dry the detergent drawer before putting in detergent. drawer. in the detergent drawer. (**) Detergent has gotten damp. • Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures.
- Page 55 Problem Cause Solution Laundry remains Excessive foam has occurred • Use recommended amount of detergent. and automatic foam absorption wet at the end of system has been activated due the programme. (*) to too much detergent usage. (*) The product does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the product and to its surrounding environment.
- Page 56 www.beko.com...