When D Is Lit Or Blinking - Ricoh FW870 Operating Instructions Manual

The "Add Toner" indicator blinks when toner is running short, and is continuously
lit when toner has run out.
Replace the toner cartridge (toner container).
Do not reuse once-used toner because it affects the copy quality.
You can make some copies even if the "Add Toner" indicator blinks.
However, you should replace the toner as soon as possible.
If no toner remains, the "Add Toner" indicator is lit and you cannot make any
copy.
R
WARNING: Do not incinerate toner or toner containers. Toner dust
might ignite when exposed to open flames.
Do not store toners where it will be exposed to heat.
Do not eat or swallow toner, and keep it out of reach of
children.
1
Open the original table and man-
ual feed table.
Do not open the image pro-
ducing unit.
2
Open the toner cartridge cover.

WHEN D IS LIT OR BLINKING

WHAT TO DO IF SOMETHING GOES WRONG 43