Advertisement
Language. Select required
WDR (Wide Dynamic Range). On/Off
Light Freq. Select 50Hz for UK
Parking Monitor. Off, Low, Middle or High
Total Capacity of SD Card
Available Capacity left on SD card
Restore Factory Settings
Firmware Version. T04 etc
Charging
Connect to USB charging (Mains or Powerbank) Will not fully charge connected to any laptop
or computer. The red LED will flash slowly when charging and will turn off when fully
charged. Appx 2 hour charging time from empty.
Please note that the camera can be used for video or photo when in charging mode.
Charge the battery with the supplied charging cable. Do not store at a temperature over
60'C /140'F
Connecting to a computer via USB data cable
Once you connect the camera with a computer via USB cable, the computer will recognise
and read the Micro SD card, you can then view the videos, images and download or delete
etc
Camera Reset
If camera is not working properly, press the power button and light mode button simultan
eously to power off and restart.
Abnormal Prompt
No card, card error, or other abnormalities: (Will beep 3 times in succession).
Low Battery alert: LED lights switch to constant, will beep 5 times, then powers off.
Memory on SD card is low and loop record is switched off. The camera will beep 8 times and
shut down
Frequently Asked Questions
Q Why won't the camera turn on ?
A The battery maybe flat. If not try Reset Function
Q Why am I still not getting a "T03_xxxxxxxxx WiFi signal?
Advertisement
