Advertisement
Turn on your mobile phone, and search networks for a name similar to T03_xxxxxxxxx.
Connect to this network by entering password "12345678" . (If you do not see the network,
refresh your phone network listings)
Click and open the RICAM APP icon on your mobile phone.
Within Recording instrument select white button to connect camera
You will now see a live view of the camera. You can stop and start recording with the round
button at the bottom of the page. The red record circle will be flashing in the top left hand
corner of then screen when in recording mode. You will also see battery level status and also
the icon to enlarge screen size to landscape if required
Select Videos to review your files. The file name is the date, time. Loop video is all of the
standard video files and emergency video files were locked by the G Sensor. (Locked files will
not automatically be overwritten by the camera). You can select any video file and play on
your mobile device by on quick press on the file. If you want to save the video file/s to you
mobile and share press and hold the file, you will then see an orange tick appear.. Select the
file/s required and press the download arrow (bottom right of screen) and you will now be
able to share your saved videos. Note you can also delete files as well if required
Select Images to view all of your photos. These can also be saved to your mobile device
Settings.
To enter settings select the Cog image in the top right..
Overview of settings below
Wifi Name – T03 etc......
Modify Wifi Password if required
Sound Recording. Turn sound on/off
Timing Watermark. Turn the date/time off on your recording
Motion Detection. Turn on/off
Sensor Mirror. This will mirror the live view if using as a live rear view mirror
Cycle Recording Time. Loop record settings. 1, 3, 5 or 10 min segments, or turn loop off
G Sensor Sensitivity. Off, low medium or high
Video Resolution. 1080FHD, 720P or WVGA
Photo Resolution. 12, 10, 8, 5, 3M or VGA
Advertisement
