Advertisement
Charging/Low Battery (Top Led/Red) - Will flash 0.5s when being charged and also when the
camera is being used and battery is getting low
nd
Recording (2
Led/Yellow) – This flash 1.0s to indicate recording is in progress
Power Off. Press and hold the power button. You will hear 5 beeps and the camera will
power down
Video Mode
The camera is automatically set to loop recording continuously in 5 minute segments, at a
default 1080P/30FPS. Loop recording when the SD card is almost full and automatically
overwriting the oldest files. The Recording indicator will flash 1.0s when recording
Photo Mode
When powered on, the camera will automatically enter recording mode. To change it to
automatic photo shooting mode (one photo a second), press the camera button twice. You
will get two quick beeps to confirm that it is now in photo shooting mode, at about 1 photo
per second. Photo resolution is up to 12M, but can be changed in settings.
LED Light Settings
After powering up, press the light mode button to change the light pattern. This will not
affect the current recording/photo function.
There are various different modes to select from, including LED off
Two Apps are suitable
APP Store - RICAM
Google Play - RICAM Pro
App Store & Google Play - Viidure
Turn on the Camera Wifi.
With the camera on, press and hold the camera button until you hear two short beeps
Advertisement
