ION Pathfinder Go User Manual page 8

Bluetooth Connecting with Pathfinder
1. Turn on Pathfinder
will automatically enter Bluetooth pairing mode.
2. Navigate to your device's Bluetooth setup screen, find Pathfinder Go, and connect. The
Bluetooth icon will appear in the display, and you will hear "Connected" (if voice prompts
are enabled).
Note: Do not connect to iSP165_BLE; this is reserved exclusively for connecting to the
ION Sound Control
Device" on your Bluetooth device and try to connect again.
3. Now you can use the buttons on the front panel to control audio playback:
•
Press the Play/Pause button to play or pause the current track.
•
Press and quickly release the + button to increase the volume.
•
Press and quickly release the - button to decrease the volume.
•
Press the > button to skip to the next track.
•
Press the < button to revert to the beginning of the current track. Repeat this action
within 1 second to skip to the previous track.
To disconnect a paired device, do any of the following:
•
Turn off Bluetooth from your device's Bluetooth settings. The speaker will enter
Bluetooth pairing mode to make it available for another device.
•
Press and hold the Bluetooth button to disconnect and re-enter pairing mode.
•
Briefly press the Bluetooth button to disconnect and enter Aux mode.
When you disconnect a Bluetooth device, you will hear "Bluetooth disconnected" if voice
prompts are enabled.
8
TM
Go by holding down the Power button for 2 seconds. Pathfinder
TM
app. If you experience trouble in connecting, select "Forget this
TM
Go
TM
Go