ION Pathfinder Go User Manual page 10

Using the Radio
To use the radio, press the Source button so that FM is selected and shown on the display.
While in FM mode, briefly press the Previous and Next buttons (</>) to move to the previous
or next station. Press and hold the </> buttons to seek for the next strongest station in that
direction.
To save a radio station as a preset:
1. Press and hold the Play/Pause button.
2. Use the </> buttons to select a preset number, 1–12, shown on the display.
3. When you have selected the desired preset number, quickly press and release the
Play/Pause button again to save it.
To recall a previously saved preset, briefly press the Play/Pause button to cycle between
the 12 presets.
USB Playback Mode
Connect a USB drive to the USB-A port on the rear panel of Pathfinder
Once the drive is connected, press the Source button until USB is selected and shown on the
display.
While in USB playback mode, you can use the following buttons on the front panel to control
playback:
•
Press the Play/Pause button to start or stop USB playback.
•
Use the Previous and Next buttons (</>) to skip to the previous or next USB track.
•
Briefly press the Link button to cycle between repeat modes, as shown on the display:
o ALL: Repeats all tracks on the USB drive.
o FOLd: Repeats all tracks in the current folder of the USB drive.
o OnE: Repeats the currently playing track.
o rAn: Randomly shuffles the track order.
Using the USB Charge Port
To use the USB charge port:
1. Connect a USB type-A cable to the USB Charge
Port on the rear panel of your Pathfinder
speaker (see image).
2. Connect the other end of the cable to the
charging input on your smartphone, tablet, or
other compatible device.
10
TM
Go
TM
Go to play music files.