Advertisement
Scheduled enabling or disabling
To use this feature, update your wearable device and the Huawei Health app to their
latest versions.
Go to Settings > Sounds & vibration > Do Not Disturb > Scheduled, touch Add time, and
•
set Start, End, and Repeat. You can add multiple time periods, and enable any of them to
enter Do Not Disturb mode at the scheduled time.
To disable scheduled Do Not Disturb, go to Settings > Sound and vibration > Do Not
•
Disturb > Scheduled.
Finding your phone using your watch
1
Swipe down on the watch face screen to enter the shortcut menu, and confirm that the
Bluetooth connection between your watch and phone is normal. You will see the
Bluetooth icon for your phone displayed as either
2
If your watch and phone are within the Bluetooth connection range, the phone will play a
ringtone (even in Vibrate or Silent mode) to help you locate it.
3
Touch the device screen to end the search.
If Auto-switch is enabled on your watch, the watch must be connected to Huawei
•
Health to use the Find Phone feature.
If you are using an iPhone and the screen is turned off, the phone may not respond
•
when you are using the Find Phone feature.
Remote shutter
When connected to a phone, you can use the Remote shutter feature to remotely control
your phone to take photos and record videos. You can also preview the photos and videos on
your watch.
HUAWEI WATCH 3 Pro new/4 Series: Remote shutter and preview are only available on
certain Huawei phones running EMUI 12.0 or later.
Remotely controlling your phone to take photos or record videos
1
Press the Up button on the watch to enter the app list, and touch Remote shutter to
enable the camera of your phone.
2
Select Photo, 2s delay, 5s delay, or 30s video on the top of the watch's camera screen.
or
.
Assistant
19
Advertisement
