Advertisement
your vehicle's current speed must be at
least 15 km/h (9 mph).
Press the ◀ (2) or ▶ (3) button on the
1.
steering wheel keypad and scroll to the
Adaptive Cruise Control symbol
> Gray symbol – Adaptive Cruise Control
is in standby mode.
2. When Speed Limiter is selected, press
(1) on the steering wheel keypad to
activate.
> White symbol – Speed Limiter starts
and the current speed is stored as the
maximum speed.
Reactivating Adaptive Cruise Control
to the last stored speed
When Adaptive Cruise Control is selected,
–
press
on the steering wheel keypad to
activate.
> The Cruise Control marking in the
instrument panel will change from
GRAY to WHITE and the vehicle will
then return to the most recently set
speed.
WARNING
A noticeable increase in speed may follow
when the speed is resumed with the
steering wheel button.
Additional markings in the instrument
panel
ACC will only regulate the
time interval to the vehicle
ahead when the distance
(4).
symbol shows two vehicles.
A speed interval will be
marked at the same time.
The higher speed is the
stored speed for your vehicle
and the lower speed is the
speed of the vehicle ahead
(target vehicle).
Related information
Adaptive Cruise Control* (p. 278)
•
Deactivating Adaptive Cruise Control*
•
(p. 281)
Switching between cruise control and
•
Adaptive Cruise Control* in the center dis-
play (p. 284)
Adaptive Cruise Control* limitations
•
(p. 283)
DRIVER SUPPORT
Deactivating Adaptive Cruise
21
Control*
22
Adaptive Cruise Control (ACC
tivated and switched off.
Press the
button on the steering
1.
wheel (2).
> The symbol and markings turn gray –
Adaptive Cruise Control goes into
standby mode. The time interval indica-
tor light and any symbols for the target
vehicle will go out.
2. Press the ◀ (1) or ▶ (3) buttons on the
steering wheel to select another function.
> The Adaptive Cruise Control symbol
and marking (4) in the instrument panel
will go out and the stored maximum
speed will be erased.
* Option/accessory.
) can be deac-
}}
281
Advertisement
