Advertisement
Disarming the alarm
Unlock and disarm the vehicle alarm by
pressing the unlock button on the remote
•
key
.
grip a door handle or lightly press the
•
trunk lid's rubberized button
Disarming the alarm without a functioning
remote key
The vehicle can be unlocked and disarmed
even if the remote key is not functioning, e.g. if
the battery is discharged.
1.
Open the driver's door using the detacha-
ble key blade.
> This will trigger the alarm.
Location of the backup key reader in the cup holder.
2. Place the remote key on the key symbol in
the backup reader in the tunnel console's
cup holder.
16
Vehicles with keyless locking and unlocking*.
3. Turn the start knob clockwise and release.
> The alarm will be disarmed.
Turning off a triggered alarm
Press the unlock button on the remote key
–
or put the ignition into mode I by turning
the start knob clockwise and then releas-
16
.
ing it.
Automatically arming and disarming
the alarm
Automatically arming the alarm helps prevent
inadvertently leaving the vehicle without alarm
protection.
If the vehicle is unlocked using the remote key
(and the alarm is disarmed) but none of the
doors or trunk lid is opened within two
minutes, the alarm will be automatically
rearmed. The vehicle will also re-lock.
On some markets, the alarm will be automati-
cally armed following a slight delay after the
driver's door has been opened and closed
without being locked.
To change this setting:
1.
Tap
Settings
view.
2. Tap
My Car
3. Select
Passive Arming Deactivation
temporarily deactivate the function.
in the center display's Top
Locking.
to
KEY, LOCKS AND ALARM
Related information
Alarm (p. 263)
•
* Option/accessory.
265
Advertisement
