Advertisement
KEY, LOCKS AND ALARM
||
This device complies with part 15 of the FCC
rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interfer-
ence, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
Any changes or modification not expressly
approved by the party responsible for compli-
ance could void the user's authority to operate
this equipment.
Canada-IC:3659A-VO3134
This device complies with Industry Canada
license-exempt RSS standards. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interfer-
ence, and (2) this device must accept any
interference received, including interference
that may cause undesired operation.
Related information
Remote key (p. 236)
•
250
Keyless and touch-sensitive
surfaces*
With the keyless locking and unlocking func-
tion, the remote key only needs to be within
range, e.g. in a pocket or bag. The vehicle can
then be locked or unlocked by touching the
pressure-sensitive surface on the door han-
dle.
Pressure-sensitive surfaces
Door handle
There are indentations on the outside of the
outer door handles for locking, and pressure-
sensitive surfaces on the inside of the handles
for unlocking.
Pressure-sensitive indentation for locking
Pressure-sensitive surface for unlocking
NOTE
It is important that only one pressure-sen-
sitive surface is activated at a time. If the
handle is grasped at the same time as the
lock area is pressed, there is a risk that
double commands may be sent. This may
cause the requested action (locking/
unlocking) to be delayed or not performed
at all.
Trunk lid handle
The trunk lid handle has a rubberized pressure
plate that can only be used for unlocking.
NOTE
Please be aware that the system could be
activated in a car wash if the remote key is
within range.
* Option/accessory.
Advertisement
