Volvo S90 Twin Engine Owner's Manual page 182

WINDOWS, GLASS AND MIRRORS
||
Related information
Using the windshield and headlight wash-
•
ers (p. 180)
Wiper blades and washer fluid (p. 178)
•
Using the rain sensor's memory function
•
(p. 180)
Filling washer fluid (p. 621)
•
Putting the wiper blades in service posi-
•
tion (p. 620)
Replacing windshield wiper blades
•
(p. 619)
Using the windshield wipers (p. 178)
•
180
Using the rain sensor's memory
function
The rain sensor monitors the amount of water
on the windshield and automatically starts
the windshield wipers.
Activating/deactivating memory
function
The rain sensor's memory function can be set
to activate so that the rain sensor button does
not need to be pressed each time the engine
is started:
1. Tap Settings in the Top view in the center
display.
2. Tap My Car Wipers.
3. Select Rain Sensor Memory
deactivate the memory function.
Related information
Using the rain sensor (p. 179)
•
Using the windshield and headlight wash-
•
ers (p. 180)
Wiper blades and washer fluid (p. 178)
•
Filling washer fluid (p. 621)
•
Putting the wiper blades in service posi-
•
tion (p. 620)
Replacing windshield wiper blades
•
(p. 619)
Using the windshield wipers (p. 178)
•
Using the windshield and
headlight washers
The windshield and headlight washers are
designed to clean the windshield and head-
lights. Use the right-side steering wheel lever
to start the windshield and headlight wash-
ers.
Starting the windshield and headlight
washers
to activate/
Washing function, right-hand steering wheel lever.
Move the right-hand steering wheel lever
–
toward the steering wheel to start the
windshield and headlight washers.
> After the lever is released, the wipers
make several extra sweeps.