Basic Operation / Display Pannel - Turbo Air M3H24-1 Installation And Operation Manual

BASIC OPERATION
1. When the heated cabinet is plugged in, the display panel will light up and make
a beep sound. The heater will then begin to run.
2. The default temperature setting is 160°F.
3. The heaters are automatically cycled by the electronic controller.
4. The heaters will be automatically turned off for safety when the door is opened.
5. The interior light will be activated when the door is opened.
6. Heater fan motors will run 24/7.
DISPLAY PANEL OF HEATED CABINET
INNER TEMPERATURE DISPLAY
UP/DOWN BUTTON (Temperature control button)
1. By pushing the up/down button, you can set the inside temperature from 140°F
to 180°F in increments of 5°F.
2. If you want lower temperature, push the Down button to the desired
temperature.
3. If you want higher temperature, push the Up button to the desired temperature.
TEMPERATURE CONTROL BUTTON
F
POWER BUTTON
12