First Time Use; Warnings And Limitations; Connection Options - Mo-vis Foot Control Omni User Manual

Hide thumbs Also See for Foot Control Omni:
Table of Contents

Advertisement

CAUTION:
An incorrect programming of the wheelchair or device electronics, may
cause damage to the devices or injury to the user.

First time use

CAUTION:
A qualified service engineer should assist during first time use of the
device and make sure that all functions are clear to the user, including what to do in
case of problems or doubt.

Warnings and limitations

NOTE:
This product complies with the limit values for Electromagnetic Compatibility
(EMC) with respect to power wheelchairs, as set out in the harmonized standards for
the EU in the Medical Device Regulation, No. 2017/745.
WARNING:
Do not cover or block the device to avoid uncontrolled behavior of the
device or the wheelchair.
CAUTION:
If an output inhibit is programmed, then it should be checked monthly if
this is still operational. Please see the Installation Manual for more information.

Connection options

The connection interface depends on the control version. Please see the Installation
Manual for more information.
You can connect 1 or 2 switches to the unit:
Red = power on/off
Yellow = mode
Foot Control User manual
11

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Foot Control Omni and is the answer not in the manual?

This manual is also suitable for:

Foot control r-netP021-51P021-52

Table of Contents