Removing Card - Ricoh RDC-7 Get Started Manual

Ricoh rdc-7: user guide

Hide thumbs Also See for RDC-7:

Table of Contents

w Insert the SmartMedia memory card

into the card insert slot and close the

card door.

Push the SmartMedia memory card fully into

position, with the contact surface facing

down.

• Insert the SmartMedia memory card in the correct direction. Do not

Note

insert it at an angle.

• The camera will not turn on when the card door is open.

Removing Card

q Check that the camera is turned off,

and then open the card door.

• "Turning on the Camera" (p.41).

See

w Pull the SmartMedia memory card

straight out of the slot.

e Close the card door.

Important

Note

• Never remove the SmartMedia memory card while data is being

recorded or erased. The data stored on the card may be lost or

damaged.

• When the SmartMedia memory card has been removed, place it in the

antistatic case supplied or other protective cover.

Set with the contact

surface facing down

Table of Contents