Table of Contents
Advertisement
Available languages
Available languages
Press and hold 1
and 2
st
buttons for 3 seconds simultaneously to
disable child lock.
Progress of programme
Progress of a running programme can
be followed from the Programme Follow-
up indicator. At the beginning of every
programme step, the relevant indicator light
will turn on and light of the completed step
will turn off.
To change the auxiliary function, speed and
temperature settings while a programme is
running, you need to switch the machine to
Pause mode. Press Start / Pause / Cancel
button to switch the machine into Pause
mode. In this case, Start / Pause / Cancel
light flashes.
C
If the machine does not pass to the
spinning step, Rinse Hold function
might be active or the automatic
unbalanced load detection system
might be activated due to the
unbalanced distribution of the laundry in
the machine.
Loading door lock
There is a locking system on the loading
door of the machine that prevents opening
of the door in cases when the water level is
unsuitable.
When machine is switched to Pause mode,
it checks the level of the water inside. If
the level is suitable, Loading Door light
illuminates steadily within 1-2 minutes and
the loading door can be opened.
If the Loading Door light is not on, Loading
Door cannot be opened. If you are obliged
to open the Loading Door while the Loading
Door light is off, you must cancel the
current programme; see "Cancelling the
programme".
Changing the selections after
programme has started
To change your settings after the program
has started, you have to switch the machine
to Pause mode first.
C
Even if you select a new programme
by changing the position of the
Programme Selection knob while the
machine is running or in Pause mode,
the programme selected first will
continue. You must cancel the current
programme to change the washing
programme. See "Cancelling the
programme".
Auxiliary Function
nd
50
Changing the auxiliary function, speed
and temperature
Depending on the step the programme has
reached, you may cancel or activate the
auxiliary functions; see, "Auxiliary function
selection".
You can also change the speed and
temperature settings; see, "Spin speed
selection" and "Temperature selection".
Adding or taking out laundry
1. Press Start / Pause / Cancel button to
switch the machine to pause mode.
2. Wait until the Loading Door can be
opened.
C
If the Loading Door light does not turn
on in 1-2 minutes, it means that the
water level in the machine is not suitable
and laundry cannot be added. You can
resume the programme by pressing
Start / Pause / Cancel button.
3. Open the Loading Door and add or
take out the laundry.
4. Close the Loading Door.
5. Make changes in auxiliary functions,
temperature and speed settings if
necessary.
6. Press Start / Pause / Cancel button to
start the machine.
Cancelling the programme
Press and hold Start / Pause / Cancel
button for 3 seconds to cancel the current
programme. At the end of this period,
machine can drain the water inside it or can
take in and drain water up to 3 times to cool
down the laundry. Washing and End lights
turn on.
Once draining is complete, Start / Pause
/ Cancel and Washing lights turn off, and
Loading Door light starts flashing.
When the Loading Door is openable,
Loading Door light turns on and remains
lit. In this case, you can select and start the
new programme.
End of programme
End light in the programme follow-up
indicator will light up once the programme
comes to an end.
1. Press On / Off button to switch off the
machine.
2. Take out your laundry and close the
loading door. Your machine is ready for
the next washing cycle.
EN
Advertisement
Chapters
Table of Contents
