Advertisement
4. USING YOUR RAZER IMPERATOR
SETTING SENSITIVITY STAGES
A sensitivity stage is a preset sensitivity value you can swap to on-the-fly. This means you can change
between multiple pre-defined sensitivities instantly by toggling between sensitivity stages.
CREATING MACROS
A. Load the Razer Configurator and click on
the "Manage Macros" tab.
B. Click "Record" to start creating a macro.
C. Type in the desired sequence of keystrokes,
then click "Stop" to end the recording.
D. Right-click on the recorded keystroke to
access more options.
E. You can also insert additional commands by
clicking on the "Advanced" button.
F. Click "Apply" when done.
SWITCHING PROFILES
You can switch between profiles in three ways:
a. By selecting the active profile in the Razer
Imperator driver software.
b. By assigning the function to a button via the
Razer Configurator in the main window.
To preset a sensitivity stage:
1. Load the Razer Configurator and
click
on
Performance" tab.
2. Click on the "Sensitivity Stage"
button.
A
Settings pop up box will appear.
3. Select the number of sensitivity
stages needed.
4. Click on the stage you would like
to preset and adjust using the
arrow on the slider below.
5. Click "Apply" when done. To
switch
between
sensitivity stages, simply assign
the Sensitivity Stage Up and
Sensitivity Stage Down functions
to the desired buttons.
the
"Adjust
Sensitivity
Stage
different
Advertisement
