Table of Contents
Advertisement
IMPORTANT: Tug hose ensuring connection is secure.
•
Turn the water on.
•
While sitting in the operator's position on the tractor,
re-start the engine and place the throttle lever in the
Fast "
" position.
IMPORTANT: Recheck the area making certain the area
is clear.
•
Move the tractor's attachment clutch control to the
"ENGAGED" position. Remain in the operator's position
with the cutting deck engaged until the deck is cleaned.
•
Move the tractor's attachment clutch control to the
"DISENGAGED" position. Turn the ignition key to the
STOP position to turn the tractor's engine off. Turn the
water off.
•
Pull back the lock collar of the hose connector to
disconnect the connector from the nozzle washout port.
•
Move the tractor to a dry area, preferably a concrete or
paved area. Place the attachment clutch control in the
"ENGAGED" position to remove excess water and to
help dry before putting the tractor away.
WARNING: A broken or missing washout
fi tting could expose you or others to
thrown objects from contact with the blade.
•
Replace broken or missing washout fi tting
immediately, prior to using mower again.
•
Plug any holes in mower with bolts and locknuts.
MAINTENANCE
23
Advertisement
Table of Contents
