Table of Contents
Advertisement
Installing the BBU in the OMB
c
Installing the BBU Cables
7. Install the FE/GE cable (FE/GE transmission mode).
a
8. Install the CPRI optical cable.
Connect the longer end of the optical cable to CPRI0, CPRI1, CPRI2, CPRI3,CPRI4 or CPRI5 on the GTMU.
Then, connect the other end to the RRU.
1. Insert the optical module into the CPRI0, CPRI1, CPRI2, CPRI3,
CPRI4 or CPRI5 port.
2. Turn outwards the puller on the optical module.
Optical module
Puller
3. Remove the dustproof caps from the
optical connectors.
4. Insert the optical connector at one end
of the CPRI optical cable into the optical
module. Lead the CPRI optical cable out of
the cabinet along the left side of the
cabinet.
a
c
b
b
46
c
Advertisement
Table of Contents
