Related Manuals for STARING SM 324
Summary of Contents for STARING SM 324
- Page 1 SM 324 Instruction manual >> Before you use the Mixer, pleace read the Intruction manual 1 << Instruction manual • Staring SM 324 •...
- Page 2 >> 2 • Instruction manual • Staring SM 324...
-
Page 3: Table Of Contents
>> SM 324 Dear STARING Customer, STARING SM 324 is a pan mixer of the most advanced design in the market and easily meeting all site requirements of today. The maximum performance and the simple, easy operation of the STARING SM324 are results of our recent develop- ment work within the mixer technology field. -
Page 4: Technical Data
>> 1. Technical Data Mixer Type ............SM 324 Mixer Weight............320 kg Gross Volume .. -
Page 5: Safety And Prevention Of Accidents
If the mixer is operated incorrectly and not in accordance with the intended purpose, damage to persons or equipment may result. Therefor any incorrect use of the mixer is not allowed! 5 << Instruction manual • Staring SM 324 •... - Page 6 The mixer is also produced in accordance with following harmonized standard : EN 292-1, 292-2, 294, 349 and 418. >> 6 • Instruction manual • Staring SM 324...
-
Page 7: Special Safety Equipment
The mixer is protected against automatic restarting and the thermal relay needs to be reset before the mixer can be used again. The rated power is stated on the electric motor machine sign. 7 << Instruction manual • Staring SM 324 •... -
Page 8: Transport
To let the gear run in under slowly increasing load, so that a full load is not reached until after 20-40 hours of operation. >> 8 • Instruction manual • Staring SM 324... -
Page 9: Starting Procedure
2. Be sure that the mixing pan is empty – if not, please emptying the pan. 3. Control that all mixing arms and paddles is properly tighten. 4. Place the mixer horizontal. 9 << Instruction manual • Staring SM 324 •... -
Page 10: Using The Mixer
Fig. 3 the direction of rotation should be checked. Filling and discharge of the mixer should only take place when the mixer is running so, hat damage to the mixer is avoided. >> 10 • Instruction manual • Staring SM 324... -
Page 11: Adjustment Af Mixer Blades
7. Turn bolt B clockwise. One rotation lowers the mixing head by approximately 2mm. Install the mixing head and check the distance between the mixer blade and the bottom. This distance should be approximately 2 mm. Fig. 5 11 << Instruction manual • Staring SM 324 •... -
Page 12: Optimum Mixing
Never direct the jet of water directly at the plug or control panel. The gearbox of the mixer requires no maintenance. If the mixer pan is damaged it will be difficult to clean it. Fig. 6 >> 12 • Instruction manual • Staring SM 324... -
Page 13: Spare Parts
>> 11. Spare Parts Only approved STARING spare parts should be used for the mixer. The warranty will be void if spurious spare parts are used. >> 12. Spare Part List SPARE PART LIST OF SM324 Description Part Number Net Cover Assembly... -
Page 14: Guarentee
4. Natural wear and tear. 5. Only use approved Staring spare parts. Where a complaint is forthcoming Staring Maskinfabrik A/S should be informed in writing together with all relevant information regarding the machine. Additionally, an, defective symptoms or cause must be informed. -
Page 15: Ec Declaration Of Conformity
Annex 1 of the Directive on essential safety and health requirements in relation to the construction and manufacture of machines. Company: STARING MASKINFABRIK A/S Name: Tommy Bredal Position: C.E.O. 15 << Instruction manual • Staring SM 324 •... - Page 16 Staring Maskinfabrik A/S Starengvej 9-11 DK-9700 Brønderslev Tlf.: +45 9882 1622 Fax: +45 9882 5591 www.staring.dk staring@staring.dk >> 16 • Instruction manual • Staring SM 324 CVR.nr. DK 2767 2701...
Need help?
Do you have a question about the SM 324 and is the answer not in the manual?
Questions and answers