Related Manuals for STARING Mega 300
Summary of Contents for STARING Mega 300
- Page 1 Mega Mixer 300 Instruction manual >> Before you use the Mixer, pleace read the Intruction manual 1 << Instruction manual • Staring Mega 300 •...
- Page 2 >> 2 • Instruction manual • Staring Mega 300...
-
Page 3: Table Of Contents
STARING MEGA 300 are results of our recent development work within the mixer technology fi eld. In order to achieve safe handling of the STARING MEGA 300, we ask you to read the following instruction manual carefully. -
Page 4: Technical Data
>> 1. Technical Data Mixer Type ............Mega 300 Mixer Weight ............520 kg Gross Volume .. -
Page 5: Safety And Prevention Of Accidents
If the mixer is operated incorrectly and not in accordance with the intended purpose, damage to persons or equip ment may result. Therefor any incorrect use of the mixer is not allowed! 5 << Instruction manual • Staring Mega 300 •... - Page 6 (89/392/EEC as amended by Directives 91/368/ EEC, 93/44/EEC and 93/68/EEC)with special reference to Annex 1 of the Directive on essential safety and health requirements in relation to the construction and manufacture of machines. >> 6 • Instruction manual • Staring Mega 300...
-
Page 7: Special Safety Equipment
Then the forks must be level (horizontally arranged) under the mixer pan in order to avoid any damage and that the mixer tips over. Never lift the mixer from the discharge side with forklift truck. 7 << Instruction manual • Staring Mega 300 •... -
Page 8: Starting Procedure
2. Check the mixer and remove all major foreign matters. 3. Check that the mixer blades are correctly fastened in order to avoid damage to the mixer. 4. Place the mixer on a surface which is as level as possible. >> 8 • Instruction manual • Staring Mega 300... -
Page 9: Using The Mixer
Fig. 3 Filling and discharge of the mixer should only take place when the mixer is running so, hat damage to the mixer is avoided. 9 << Instruction manual • Staring Mega 300 •... -
Page 10: Optimum Mixing
The cotter pins and bolts on the 4 telescope legs are then removed and the mixer is lifted or lowered to the required height. After the discharge the cotter pins and bolts are tightened again. >> 10 • Instruction manual • Staring Mega 300... -
Page 11: Adjustment Af Mixer Blades
Dimension B = 2 – 5 mm Fig. 4c and tighten the screws. Fig. 4d 6. Insert the centre cover. 7. Place the safety cover and tighten the screws. Fig. 4d 8. Restart the mixer. 11 << Instruction manual • Staring Mega 300 •... -
Page 12: Cleaning And Maintence Of The Mixer
Never direct the jet of water directly at the plug or control panel. The gearbox of the mixer requires no maintenance. If the mixer pan is damaged it will be diffi cult to clean it. Fig. 6 >> 12 • Instruction manual • Staring Mega 300... -
Page 13: Spare Parts
>> 11. Spare Parts Only approved STARING spare parts should be used for the mixer. The warranty will be void if spurious spare parts are used. >> 12. Spare Part List Name Spare Part No. Quantity Cover 0310 2010 Centre Bracket... -
Page 14: Guarentee
4. Natural wear and tear. 5. Only use approved Staring spare parts. Where a complaint is forthcoming Staring Maskinfabrik A/S should be informed in writing together with all relevant information regarding the machine. Additionally, an, defective symptoms or cause must be informed. -
Page 15: Ec Declaration Of Conformity
93/68/EEC) with special reference to Annex 1 of the Directive on essential safety and health requirements in relation to the construction and manufacture of machines. Company: Name: Position: Date Signature 15 << Instruction manual • Staring Mega 300 •... - Page 16 Staring Maskinfabrik A/S Starengvej 9-11 DK-9700 Brønderslev Tlf.: +45 9882 1622 Fax: +45 9882 5591 www.staring.dk staring@staring.dk CVR.nr. DK 2767 2701 >> 16 • Instruction manual • Staring Mega 300...
Need help?
Do you have a question about the Mega 300 and is the answer not in the manual?
Questions and answers