Installing & Removing Backrest - Safety 1st Boost-and-Go Disney MagicSquad Manual

3-in-1 harnessed booster
Table of Contents

Advertisement

33
6
FINISHED!
Position Shoulder
Belt on Child
Pull up on the shoulder belt to
tighten.
The shoulder belt should lay
snugly across the center of
your child's shoulder and
across their chest; not on
their face or neck.
Only use the belt positioning
clip if necessary to help
position the shoulder belt
correctly on your child.
Check periodically to make
sure your child has not
moved out of position and
loosened the shoulder belt.
Keep the booster seat
securely belted through
the belt-positioning guide
even when unoccupied.
Installing & Removing
Backrest
Installing Backrest
Locate backrest connection slots in seat & slide backrest
attachment hooks into slots.
You may need
to push the seat
pad flap back to
reveal slots.
Rotate backrest all the way forward. It will click twice.
Pull out harness system through the slots on backrest and
attach on splitter plate.
Removing Backrest
Detach on splitter plate and pull out harness system
through the slots on backrest.
Rotate backrest all the way back. It will click twice.
Then lift backrest out of seat.
34

Advertisement

Table of Contents
loading

Table of Contents