Advertisement
2
Mounting screw indentation
You can use the Mounting screw indentation to secure the board in a M.2 Key
E socket. Also see
3
External antenna U.FL connector ANT1
You can use the U.FL connector to connect an external antenna. Also see
Antenna Configuration
4
Wi-Fi status indicator LED
The Wi-Fi status indicator LED for indicating the Wi-Fi status is currently non-
operational.
5
Bluetooth status indicator LED
The Bluetooth status indicator LED for indicating the Bluetooth status is
currently non-operational.
6
M.2 Key E connector
You can insert the PAN9028 M.2 device into a M.2 Key E socket to connect
the modules interfaces to a host processor. Also see
M.2 Connector Pin Map
7
Power LED
You can observe the Power LED to verify that the board is correctly powered.
D E V I C E D I M E N S I O N S
Mounting the Device
Advertisement
