Removing The Drawers; Inserting The Drawers; Moving Slides; Commissioning - GARANT GRIDLINE 944520 Instruction Manual

6.3. REMOVING THE DRAWERS

E
1. Pull out the drawer.
2. Pull out the locking mechanism and swing it upwards. Remove the drawer.

6.4. INSERTING THE DRAWERS

F
1. Pull the drawer runners out to their full extent and secure them.
2. Insert the drawer and push it in until you sense resistance.
3. Lift the drawer up and push it over the resistance until it is fully inserted on the rails.
4. Swing the locking mechanism down and push it to the back.

6.5. MOVING SLIDES

G
ü Drawers removed.
1. Push a standard screwdriver between cabinet wall and the guide rail.
2. Carefully push the screwdriver off the cabinet wall to prise off the guide rail.
3. Lift off the guide rail.
4. Working from above, insert the guide rail into the hole in the desired position.

7. Commissioning

7.1. LAPTOP CABINET

1. Insert the mains plug into a mains socket.

7.2. BATTERY CHARGING CABINET

1. Plug 5-pin 400-V/16-A connector into three-phase outlet socket.
2. Switch on main switch.

8. Maintenance

Interval
Once a week in rooms with
normal levels of air pollu-
tion
Once a day in rooms with
heavily polluted air
Before the start of each
shift
Occasionally
Tab. 1: Maintenance activities
Action
1. Remove cover panel with a
standard screwdriver.
2. Clean filter.
3. Put cover panel back in place.
» Cover panel engages.
Check for external signs of dam-
age, for defects and for good con-
dition. Check the edges and
guides for signs of wear.
4. If defective, immediately block
access and prevent use.
5. Have the damage repaired im-
mediately.
Grease any locks and wheels with
multi-function oil.
www.hoffmann-group.com
Performed by
Trained specialist for electro-tech-
nical work
Trained person
Trained specialist for mechanical
work
en
27