Scan The Channels; Use The Memory; Change The Transmitting Power - Raymarine Ray240 User Manual

24
How do I
Non-priority scanning
PRESS and HOLD this button for non-priority scanning.
Figure 2-1:The radio will scan the channels in sequence for activity,
Priority scanning
PRESS this button to start priority scanning.
The radio scans the priority channel in between scanning each
channel in sequence. If activity is detected on a channel the radio
automatically tunes to that channel.
Create a channel list
To create a channel list, select the first channel required, PRESS and
MEMORY
hold this button.
Add channels by selecting the number and then pressing and
holding this button.
1/25
PRESS this button to change the transmitting power of the radio
from 1Watt (Low) to 25 Watt (High) and vice versa.

....scan the channels?

automatically tuning to a channel if activity is detected.

....use the Memory?

....change the transmitting power?

Ray240 User Manual