Let's Get Started - TecTecTec VPRO500S Manual

LET'S GET STARTED

MODE BUTTON
NORMAL/SCAN > PIN SEEKER > SLOPE
Press briefly to change modes from Normal/
Scan to Pin Seeker and Slope. Press and
hold for 3 seconds to change the unit
of measurement.
TARGET SEEKER
Advanced laser technology
zeros in on the flag.
TRUST YOUR RANGE
MASTER YOUR GAME
POWER BUTTON
One button operation point.
Automatic shut-off after
30 seconds unattended.
EYEPIECE
Rotate left or
right to adjust the
diopter until the
view is in focus.
BATTERY COVER
Slide down to open.
Insert a CR2-3V
lithium battery firmly.
WRIST STRAP SLOT
To attach the wrist strap, loop it through
the slot located on the bottom.