Samsung DW80M2020US/AC Service Manual page 24

Part
Bracket front
lower
※ Reassembly is in the reverse order of the removal.
22 _ Disassembly and Reassembly
All manuals and user guides at all-guides.com
Figure Description
Preparation:
●
Disassemble the Base Cover.
- Refer to the Base Cover disassembly
section to separate.
1. Remove the Sound-proof Felt of Lower
Front Crosspiece.
2. Remove the nine screws outside and pull
out the Junction Box-B and PBA cover .
3. Remove the two screws of Junction Box-A,
then pull out the Rubber Ring and the
Junction Box-B.
Caution
Make sure to wear gloves when removing it.
Be careful as the steel plate is sharp and
may cutyou.
4. The guide wire is attached to the Lower
Front Crosspiece with hooks. Use a pair
of needle nose pliers or flat screwdriver
to remove them.