Reserve An Ip Address Based On Mac Address; Set A Poe Schedule - Axis 5801-694 User Manual

AXIS T85 PoE+ Network Switch Series
Setup examples
2. Under Basic Settings in the Protocol Version drop-down menu, select RSTP, and click Apply.
3. Go to Advanced > Spanning Tree > Configuration > CIST Port.
4. Under CIST Normal Port Configuration, make sure that STP Enabled is selected for the switch's ports as follows:
- Switch – 01: ports 25 and 26
- Switch – 02: ports 17 and 18
- Switch – 03: ports 9 and 10
5. Click Apply.
Note
If you want to make sure that a certain port is used as a primary communication link, enter Path Cost for that port under
CIST Normal Port Configuration. If not specified, the switch chooses the port automatically. For example, if you want to use
port 17 as the primary communication link, enter Path Cost value 10 to port 25 and Path Cost value 50 to port 18.
To save the start-up configuration, click

Reserve an IP address based on MAC address

1. Go to Advanced > DHCP Server > Configuration > Pool.
2. Click Add New Pool.
3. Enter a name for the pool, for example 00:01:02:03:04:05, and click Apply. No spaces are allowed in the name.
4. To access the pool settings, click the added name.
5. In the Type drop-down menu, select Host.
6. Enter other required settings, such as IP address, Subnet Mask and Default Router.
7. In the Client Identifier drop-down menu, select MAC.
8. In the Hardware Address field, enter F8-16-54-B2-35-63.
9. Click Apply.
To save the start-up configuration, click

Set a PoE schedule

If you have a certain time frame where you want the switch to provide PoE, for example, to your cameras, it can be useful to create a
PoE schedule and assign it to one or more PoE ports. You can create up to 16 PoE schedule profiles.
To create a PoE schedule:
1. Go to Advanced > PoE > Configuration > Schedule Profile.
2. In the Profile drop-down menu, select a number for the profile.
3. Change the default profile name as needed.
4. To specify when you want PoE to switch on, select hours (HH) and minutes (MM) in the Start Time drop-down menu.
5. To specify when you want PoE to switch off, select hours (HH) and minutes (MM) in the End Time drop-down menu.
on the product's web page. See Get to know your product's web page on page 9 .
on the product's web page. See Get to know your product's web page on page 9 .
12