Using The Extractor Hood - Dometic 9107300002 Installation And Operating Manual

Using the extractor hood

6.3 Connecting the power to the extractor hood
➤ Connect the extractor hood to the battery using the terminal at the rear of the
device; see fig. 5, page 5.
Connect the following wires: Red to red and black to black/blue.
Key
No. in fig. 5,
Description
page 5
1 Fuse holder with fuse 4 A T (5 x 20 mm)
2 Battery (12 Vg)
bk Black
rd Red
6.4 Fastening the extractor hood in place
➤ Position the extractor hood under the wall-mounted cupboard and fasten it in
place using the four screws provided (fig. 6, page 6).
➤ Fit the filter holder and clip it into place.
➤ Fit the cover (fig. 7 2, page 6) and fasten it using the two screws (fig. 7 1,
page 6).
7 Using the extractor hood
7.1 Switching the extractor hood on and off
➤ Switch the extractor hood on using the " " switch (fig. 1 2, page 3).
7.2 Switching the light on and off
➤ Switch the light on using the " " switch (fig. 1 3, page 3).
7.3 Tips for use
•
Switch on the extractor hood a few minutes before starting to cook. This helps
the dome of air to form, which surrounds the steam and odours and allows them
to be extracted.
12
CK2000
EN