Cleaning - Dometic 9107300002 Installation And Operating Manual

Cleaning

➤ Remove the two screws (fig. 2 1, page 4) on the cover (fig. 2 2, page 4) and
remove it.
➤ Remove the filter holder from the device (see chapter "Opening the extractor
hood" on page 12).
➤ Unclip the filter holder (1) at the points marked (fig. 4, page 5).
➤ Remove the active carbon filter from the holder and replace it with a new one
(fig. 9, page 7).
➤ Fit the filter holder and clip it into place.
➤ Fit the cover back into place and fasten it using the two screws.
7.6 Replacing the lamps
➤ Remove the two screws (fig. 2 1, page 4) on the cover (fig. 2 2, page 4) and
remove it.
➤ Remove the filter holder from the device (see chapter "Opening the extractor
hood" on page 12).
➤ Unclip the filter holder (1) at the points marked (fig. 4, page 5).
➤ Carefully pull the lamps out of the socket.
➤ Replace the lamps with lamps with the same designation.
➤ Fit the filter holder and clip it into place.
➤ Fit the cover back into place and fasten it using the two screws.
8 Cleaning
A
NOTICE! Damage hazard
Do not use sharp or hard objects or cleaning agents for cleaning as these
may damage the product.
➤ Occasionally clean the product with a damp cloth.
➤ Clean the grease filter regularly (see chapter "Cleaning the air filter" on page 13).
14
CK2000
EN