Replacing The Display Assembly; Procedure; Post-Requisites - Dell Inspiron 15-7579 Service Manual

Replacing the display assembly

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Procedure

CAUTION: Place the computer on a soft and clean surface to avoid
scratching the display.
1 With the display facing down, align the screw holes on the display hinges
with the screw holes on the palm-rest assembly.
2 Replace the screws that secure the display assembly to the palm-rest
assembly.
3 Turn the computer over and close the display.

Post-requisites

1 Replace the system
2 Replace the heat
3 Replace the solid-state
4 Replace the memory
5 Replace the wireless
6 Replace the battery.
7 Replace the base
80
computer. After working inside your
board.
sink.
drive.
module.
card.
cover.
After working inside your