Hisense LASER TV 90L5HE User Manual page 26

The picture is normal but there is no sound
1. Check the volume settings.
2. Check if 'Mute' mode is set to On.
Sound but no picture or black and white picture
1. If the picture is black and white, unplug the Laser TV from the AC outlet and replug it after 60 seconds.
2. Check that the Colour Saturation is set to 50 or higher.
3. Try different channels.
The sound and/or picture is distorted or appears wavy
1. An electric appliance may be affecting the Laser TV. Turn off any appliances that are nearby and move it farther away from the
Laser TV.
2. Insert the power plug of the Laser TV set into another power outlet.
The sound and picture is blurry or cuts out
1. If using an external antenna, check the direction, position and connection of the antenna.
2. Adjust the direction of your antenna or reset or fine tune the channel.
The plastic cabinet makes a "clicking" type of sound
The 'click' sound can occur when the temperature of the Laser TV changes. This change causes the Laser TV cabinet to expand or
contract, which makes the sound. This is normal and the Laser TV is OK.
The remote control does not work
1. Confirm that Laser TV still has power and is operational.
2. Change the batteries in the remote control.
3. Check if the batteries are correctly installed.
19