Step 3 Adjust The Display Image And The Screen - Hisense LASER TV 90L5HE User Manual

STEP 3 Adjust the Display Image and the Screen

• Follow the steps in the order shown below, only if they apply to
your situation.
• Before adjusting, fold the wall-mount bracket wands so that
screen is vertically level.
• Use the wrentch to rotate feet from an overlooking view, but do
not look directely at the lens when the Laser TV is on because
the laser light may damage your eyes.
PARALLEL THE BOTTOM OF THE IMAGE WITH THE SCREEN
If the bottom of the image is
lower on the left and higher
on the right, rotate the Laser
TV counterclockwise.
If the bottom of the image is
lower on the right and higher
on the left, rotate the Laser TV
clockwise.
FIT THE BOTTOM OF THE IMAGE TO THE SCREEN
• Make sure the bottom of the image always stays parallel
with the screen. If not, rotate the Laser TV following previous
instructions.
If the image shifts to the left
side, then move the Laser
TV to the right.
If the bottom of the image is
wider than the screen, then
move the Laser TV closer to
the screen.
9
If the image shifts to the
right side, then move the
Laser TV to the left.
If the bottom of the image is
narrower than the screen,
then move the Laser TV
farther from the screen.