Table of Contents
Advertisement
Home Connect
en
Symbol
Function
WLAN signal strength
•'ˆ
Not connected to home network (WLAN).
‹
Signal strength 1 (poor)
‚
Signal strength 2 (moderate)
ƒ
Signal strength 3 (good)
„
Connection to Home Connect server
•'‰
Not connected.
‹
Connected.
‚
* Basic setting
Notes
The
setting is only displayed if the appliance is
•'ƒ
■
connected to the home network.
The
setting is only displayed if the appliance
•'„
■
has once connected to a network.
The
setting is only displayed if an update is
•'†
■
available.
The
setting is only displayed if Customer
•'‡
■
Service is attempting to connect to the appliance.
You can end this at any time after granting access.
The
and
•'ˆ
•'‰
■
there is a connection to WLAN.
Deactivating Wi-Fi
If Wi-Fi has been activated, you can use the Home
Connect functions.
In networked standby mode, your appliance
Note:
requires a maximum of 2 W.
Switch on the hob.
1.
Touch and hold the
2.
The product information is displayed.
Touch the
symbol repeatedly until the
0
3.
setting appears.
lights up on the cooking position display.
‚
Set the
value on the control panel.
‹
4.
This deactivates Wi-Fi; the
control panel.
28
settings are only displayed if
symbol for four seconds.
0
•'„
D
symbol will go out on the
Disconnecting from the network
Y ou can disconnect your hob from the network at any
D i s c o n n e c t i n g f r o m t h e n e t w o r k
time.
If your hob is disconnected from the network, it is
Note:
not possible to operate it using Home Connect.
Switch on the hob.
1.
Touch and hold the
2.
The product information is displayed.
Touch the
0
symbol repeatedly until the
3.
setting appears.
„
lights up on the cooking position display.
Set the
value on the control panel.
‹
4.
This disconnects the appliance from your home
network; the
symbol will go out on the control panel.
D
Connecting to the network
Switch on the hob.
1 .
C o n n e c t i n g t o t h e n e t w o r k
Touch and hold the
2.
The product information is displayed.
Touch the
0
symbol repeatedly until the
3.
setting appears.
lights up on the cooking position display.
‹
On the control panel
4.
set the "Connect automatically"
or the "Connect manually"
Follow the instructions as per ~ "Automatic
5.
registration in the home network" or ~ "Manual
registration in the home network".
Connect to the app
If the Home Connect app is installed on your mobile
device, you can connect it to your hob.
Notes
The appliance must be connected to the network.
■
The app must be open and be set up.
■
If your extractor hood is directly connected, first
■
disconnect the hob from your home network and
then initiate the connection process
again.~ "Disconnecting from the network"
on page 28~ "Connecting to the network"
on page 28
symbol for four seconds.
0
•'‚
0
symbol for four seconds.
•'‚
value or
‚
value.
ƒ
Advertisement
Table of Contents
