Advertisement
Component list
M6 washer x 8 pcs
5
M6*15mm screw x 8 pcs
6
M3.2*4.5mm screw x 14 pcs
7
Installing the Front Mounting Ear x 2 pcs
1. Disassemble the standard front mounting ears carefully.
2. Install the optional front mounting ears with M3.2*4.5 mm
screw x 8 pcs.
Installing into Rack
•
Attach the mounting bracket to vertical mounting rails.
•
Adjust the rear mounting bracket to fit your rack.
•
Repeat the above steps for the other side.
Caution: Leaving the screws slightly loose (not release).
LCD KVM Console QSG
QSG-T1700_T1900-0B-v1.1-E 255-37-0016-00
•
Attach support brackets to chassis with M3.2*4.5mm screw
x 3 pcs.
•
Repeat the above step for the other side.
•
Pick up the chassis.
•
Insert inner members of slides into the already mounted
internal slide members in the rack.
•
Push the white-arrow button on each slide that is installed
on the LCD keyboard drawer to unlock (Push at the same
time).
Caution: Be careful when pushing the chassis into the left
and right slides. Avoid pressing the red button located on
either side of the slide.
3
Advertisement
