Mount The Camera - D-Link DCS-820L Quick Install Manual

Please refer to the steps below to assist you with mounting the camera.
We suggest that you configure the camera before mounting.
Warning: Indoor use only. Do not mount in a location where it may
be in contact with water as it may damage the product and/or cause
injury.
30mm
43mm
DCS-82 0L
LA1
FCC ID: KA2CS825
IC: 4216A-CS8 25LA1
CAN ICES-3 (B)/NMB-3 (B)
Model: DCS-820LA 1

Mount the Camera

Use a 6mm drill bit to drill two holes 43mm
apart, and at least 30mm deep. Then use a mallet
o insert the wall anchors into the holes.
crew the included screws into the wall anchors.
Place the mounting holes on the base of the
camera over the screws as shown, then slide the
amera down to mount the camera.
7